EN
16
Installation
www.bora.com
6 Installation
X
X
Observe all safety and warning information
(see the Safety section).
INFO
The device must not be installed above cooling
devices, dishwashers, stoves, ovens, washing
machines or dryers.
INFO
The contact surfaces of the worktops and wall
sealing strips must be made of a heat-resistant
material (up to approx. 100 °C).
INFO
Worktop cut-outs must be moisture-sealed
using suitable means and, where necessary,
fitted with a thermal insulator.
6.1 Checking the scope of delivery
X
X
Check the scope of delivery to make sure everything
has been provided (see table (see Table 6.1 and 6.2).
X
X
If there are any missing or damaged parts, please
notify BORA After Sales Service.
X
X
Do not under any circumstances install parts which are
damaged.
X
X
Dispose of transport packaging in the proper manner
(see the Decommissioning, disassembly and disposal
section).
X
X
Adhere the supplied nameplate (adhesive label) to the
back of your operating and installation instructions.
Scope of delivery PKA
Name
Quantity
Operating and installation instructions
1
Cooktop extractor
1
Height adjustment plate set
1
Mounting clamps
4
Control knob
1
Stainless steel grease filter
1
Filter tray
1
Maintenance tray
1
Cover flap
1
CAT 5 communication cable
1
Universal control unit
1
Power supply cable
1
Straight ducting piece
1
Control knob cable – interface/extractor 1000 mm
1
Tab. 6.1 Scope of delivery PKA
Scope of delivery PKAS
Name
Quantity
Operating and installation instructions
1
Cooktop extractor
1
Height adjustment plate set
1
Mounting clamps
4
Control knob
1
Stainless steel grease filter
1
Filter tray
1
Maintenance tray
1
Cover flap
1
Power supply cable
1
Control knob cable – interface/extractor 250 mm
1
Tab. 6.2 Scope of delivery PKAS
6.2 Tool and aids
The following tools are required to correctly install the
cooktop extractor:
Q
Q
Pencil
Q
Q
Tape measure or metre rule
Q
Q
Standard or cordless drill with Forstner bit Ø50 mm
Q
Q
Black, heat-resistant silicone sealant
Q
Q
Flat screwdriver
Q
Q
Torx screwdriver size 20
Q
Q
Torx screwdriver size 10 (PKA only)
6.3 Assembly instructions
6.3.1 Safety clearances
1
3
2
Fig. 6.1
Recommended minimum clearances
Содержание PKA1UMEN-001
Страница 43: ......
