Operating Manual
Universal Flow Computer UR06
Bopp & Reuther
A-EN-08728-URRev.B
Subject to changes
Page 21 of 55
Messtechnik GmbH
12 Display and User Interface
12.1 General information
The universal flow computer UR06 is supplied with a factory default setting. Optionally, it can be set to
the operating conditions specified in the order. See the enclosed configuration data sheet for the set
values.
The meter can be configured or operated in two different ways:
1. Programming via Modbus interface
2. On-site operation via membrane keys
12.2 LC display
The graphical LC display allows users to view all the parameters, counters as well as input and output
variables. Display selection is carried out via keys. The backlight of the display is activated via the
respective key. The backlight is set to go off 10 minutes after the last keypress and the device
switches to the standard display.
12.2.1 Display of measured values
UR06
1: Standard volume 1
0004711.987
m3
2: Volume 1
0123456.789
m3
With faulty measured values or constant default values, an additional symbol appears to make it
easier to differentiate between these values and real measured values.
UR06
Temperature 1
!
20.00
°C
Pressure 1
=
15.00
bar
Header:
The display alternates between the programmable TAG number and the error messages.
Line name:
The name of the displayed value and also the line number are shown for better orientation. The line
number is hidden after approx. 5 s.
Value + unit:
The value with decimal places and the unit are displayed. The number of decimal places and the unit
can be parameterized. The decimal places of the counters can be additionally highlighted by a frame.
Header
Faulty measured value,
the substitute value is
displayed (default)
Constant value
Line name
Value + unit
