
INFORMATION CENTER (GAUGES)
Navigating the
Multifunction Display
When the electrical system is pow-
ered up and the cluster has completed
its self test function, a WELCOME
ABOARD SEA-DOO scrolling mes-
sage will appear for a few seconds.
After the welcome message, nothing
will appear in the display until the wa-
tercraft is operated.
When the watercraft is being oper-
ated, the multifunction display pro-
vides an indication of compass heading
or scrolling messages from the moni-
toring system.
The multifunction display is also used
to display a menu for the selection of
various functions which, permit chang-
ing the numerical display indication,
system modes of operation, settings,
active system fault codes, and a lap
timer.
WARNING
Selecting various numerical dis-
plays, system modes of opera-
tion or changing settings should
only be carried out with the water-
craft stopped. Selecting these var-
ious functions while operating the
watercraft at speed is not recom-
mended as it deters your attention
from situational awareness.
in
AM
RPMgal/h
lap
MULTIFUNCTION DISPLAY
NOTE:
To change the unit of measure-
ment or the language displayed, see
your authorized Sea-Doo dealer.
Selecting Functions
When operating at speed, the multi-
function display normally provides an
indication of the compass direction and
azimuth the watercraft is traveling.
To select the various functions avail-
able through the multifunction display,
press the MODE button repeatedly un-
til the desired function is visible:
– LAP TIME
– SKI MODE
– FUEL CONSUMPTION
– VTS MODE
– DISPLAY
– FAULT CODES
– KEY MODE
– SETTINGS.
Then press the SET button to enter that
function.
NOTE:
The fault code function is only
available when there is an active fault.
The settings and key mode functions
are only available when the engine is
shut off. The key mode function is only
available with a normal key.
Function Description
Lap Timer
The lap timer can be used to record up
to 50 individual lap times.
To activate and use the lap timer, carry
out the following:
1. Press the MODE button repeatedly
until LAP TIME is visible in the multi-
function display.
_______________
65
Содержание Sea-Doo GTX
