PRE-RIDE INSPECTION
CAUTION
When operating the
engine with the watercraft out of
the water, the engine and heat ex-
changer in the ride plate may be-
come very hot. Avoid any contact
with hot engine parts and the ride
plate as burns may occur.
Steering System
Assisted by another person, check
steering operation for free movement.
When the handlebar is horizontal,
the jet pump nozzle should be in the
straight ahead position. Ensure the jet
pump nozzle pivots easily and in the
same direction as the handlebar (e.g.:
when handlebar is turned to the left,
the nozzle opening must point towards
the LH side of watercraft).
WARNING
Check handlebar and correspond-
ing steering nozzle operation be-
fore starting. Never turn handle-
bar while someone is near the rear
of the watercraft. Keep away from
steering moving parts (nozzle, iBR
gate, linkages etc.).
Throttle Lever
Check the Electronic Throttle Control
lever (ETC) for free and smooth opera-
tion. It should return to its initial posi-
tion immediately after it is released.
WARNING
Check throttle lever operation be-
fore starting the engine. If any fric-
tion is felt in the throttle lever, refer
to an authorized Sea-Doo dealer.
iBR Lever
Check the iBR lever for free and
smooth operation. It should return
to its initial position immediately after
it is released.
WARNING
Check iBR lever operation before
starting the engine. If any friction
is felt in the iBR lever, refer to an
authorized Sea-Doo dealer.
Storage Compartments, Boarding
Platform and Seat
Ensure all required safety and survival
equipment and any additional cargo is
properly stored in the storage bins pro-
vided.
Ensure the storage bin cover, glove
box, boarding platform, access panels,
and seat are closed and latched.
WARNING
Ensure the seat, boarding plat-
form, access panels, and all stor-
age compartment covers are se-
curely latched.
Wakeboard Rack (WAKE Pro model)
WARNING
Ensure wakeboard rack is properly
secured to watercraft body, and
that the wakeboard is properly po-
sitioned and secured to the rack
prior to using watercraft. Ensure
wakeboard retaining straps are in
good condition.
Ski/Wakeboard Pylon (WAKE Pro
model)
Make sure ski/wakeboard pylon is fully
extended and locked before use.
Completely retract and lock when not
used.
WARNING
When using the ski pylon, never
carry cargo or accessories on the
boarding platform.
________
SAFETY INFORMATION
________
43
Содержание Sea-Doo GTX
