OPERATING MODES
in
AM
RPMgal/h
lap
MESSAGE DISPLAYED
CRUISE MODE ACTIVE
Changing Set Cruise Speed
To
increase
or
decrease
the set cruise
speed:
1. Keep throttle lever fully depressed.
2. Press the UP/DOWN button.
in
AM
RPMgal/h
lap
MESSAGE DISPLAYED
CRUISE MODE _ SPEED ADJUSTING
3. Press the UP/DOWN button to ad-
just speed accordingly.
Deactivating Cruise Mode
To deactivate cruise mode:
1. Release the throttle lever.
2. Press the cruise button.
Deactivation of cruise mode is indi-
cated by:
– The CRUISE indicator light in the
speedometer display will go off.
– A BEEP will be heard.
NOTE:
If the throttle lever is not fully
released when the cruise button is
pressed to deactivate cruise mode, the
BEEP will not be heard and the cruise
light will remain on. The speed limiting
function of cruise mode will stay active
until the throttle is fully released, then
the BEEP will be heard and the cruise
light will go out.
Slow Speed Mode
The Intelligent Throttle Control also
allows for a Slow Speed Mode where
the driver can adjust and set idle speed.
This is usefull when operating in slow
speed zones where the driver must be
especially attentive to possible obsta-
cle avoidance.
The operator can set idle speed
between
1.6 km/h to 11 km/h
(1 MPH to 7 MPH).
If you accelerate above approximately
14 km/h (9 MPH) , Slow Speed Mode
will be deactivated and the engine will
return to idle RPM when the throttle is
released.
Should a situation arise where the op-
erator must stop or accelerate quickly
away from a hazardous situation,
pulling in the iBR lever, or pulling in on
the throttle lever will deactivate slow
speed mode and normal control of the
watercraft will be returned to the oper-
ator.
Activating Slow Speed Mode
To activate slow speed mode of opera-
tion:
1. Release the throttle lever to idle
RPM.
2. Pull in and release the iBR lever to
engage neutral.
3. Press and hold the cruise button for
approximately 1 second.
______________
105
Содержание Sea-Doo GTX
