BOMBARDIER Sea-Doo GTX, Руководство оператора

Страница: 46 / 196

PRE-RIDE INSPECTION
WARNING
Use caution with skier/wake-
boarder in tow as tow rope may
backlash to watercraft when re-
leased. Never perform a sharp
turn when towing a skier, wake-
boarder or any toy. Always store
tow rope when not in use.
NOTICE
The ski/wakeboard py-
lon is designed for towing a skier
or wakeboarder with a maximum
weight of 114 kg (250 lb).
CAUTION Never use the ski
pylon to tow an inflatable tube. Al-
way use the rear cleat for towing an
inflatable tube.
Engine Cut-Off Switch and Engine
START/STOP Button
Press the start button once without
installing the tether cordon the engine
cut-off switch.
Install the tether cord cap on the en-
gine cut-off switch.
Press the START/STOP button to start
the engine, then stop it by pressing the
START/STOP button a second time.
Restart the engine, then stop it by re-
moving the tether cord from the engine
cut-off switch.
WARNING
Should the tether cord cap be
loose or fail to remain on the en-
gine cut-off switch, replace the
tether cord immediately in order
to avoid unsafe use. If remov-
ing the tether cord cap from the
engine cut-off switch or pressing
the START/STOP button does not
stop the engine, do not use the
watercraft. See your authorized
Sea-Doo dealer.
What to Do After
Launching the Watercraft
Check the items listed in the follow-
ing table after launching the watercraft
and before going for a ride.
ITEM OPERATION
✓
Information Center
Check
operation.
Intelligent Brake
and Reverse
System (iBR)
Check
operation.
Variable Trim
System (VTS) Check
operation.
Information Center (Gauge)
1. Press START/STOP button and
install tether cord on the engine
cut-off switch.
2. As the information center cycles
through its self-test function, en-
sure all indications come on.
WARNING
Always attach the tether cord clip
to your PFD or to the wrist (wrist
strap required).
iBR System
NOTICE
Ensure there is sufficient
space ahead and behind watercraft
to safely carry out the iBR system
test to avoid a collision. Watercraft
will move during test.
1. Remove the moorings lines secur-
ing the watercraft to the dock.
2. Start the engine and ensure the wa-
tercraft does not move.
3. On the left handlebar, depress the
iBR lever completely in, the wa-
tercraft should move slowly back-
wards.
4. Release the iBR lever, there should
not be any reverse thrust.
44
_______
SAFETY INFORMATION
________