BOMBARDIER Sea-Doo GTX, Руководство оператора

Страница: 43 / 196

PRE-RIDE INSPECTION
ITEM OPERATION
✓
iTC lever
Check operation. (Depress and release
the lever to check for freedom of
movement. If any friction is felt, the lever
must be taken apart, cleaned, inspected
for wear and lubricated)
iBR lever
Check operation. (Depress and release
the lever to check for freedom of
movement. If any friction is felt, the lever
must be taken apart, cleaned, inspected
for wear and lubricated)
Front storage compartment cover,
glove box and seat
Ensure they are closed and latched.
Storage bin organizer (If equipped) Ensure it is properly installed on watercraft
Wakeboard rack (WAKE Pro model)
– Ensure rack is properly installed and
secured.
– Make sure bungee cords are in good
condition.
– Ensure wakeboard is correctly installed
in rack and secured.
Ski/wakeboard pylon (WAKE Pro
model)
Inspect and check operation.
Engine START/STOP button Check operation
Engine cut-off switch and the
monitoring beeper
Check operation
Battery condition and connections Check every month
Sacrificial anodes
Inspect every month (more often in
saltwater use) and change if necessary
Hull
Inspect hull for cracks and other dam-
ages.
Jet Pump Water Intake
Remove weeds, shells, debris or any-
thing else that could restrict the flow of
water and damage the propulsion unit.
Clean as necessary. If any obstruction
cannot be removed, refer to an autho-
rized Sea-Doo dealer for servicing.
219001878-003_a
INSPECT THESE AREAS
1. Water intake
2. Ride plate
________
SAFETY INFORMATION
________
41