background image

i

All of us at Mercury Marine want to thank you for choosing a

Mercury  Marine  Inflatable  boat.  You  have  made  a  sound

investment in boating pleasure. We firmly believe it will bring

you many years of boating fun and excitement.
This  Owners  Manual  contains  all  the  safety  and  operating

information you need to get the most out of your Inflatable

boat. It also contains information on how to provide care and

maintenance  to  help  protect  your  investment.  Store  this

manual for future reference.
The  operator,  passengers  and  craft  are  governed  by  local,

national,  and  when  applicable,  international  rules  and

regulations of the waterways. If you are not familiar with these

rules  and  regulations,  your  local  Department  of  Natural

Resources can assist you. Safety courses are available from

national and local organizations and are highly recommended

for anyone who is not familiar with the rules and regulations

on operating a boat.
Please  read  and  understand  this  manual  carefully  before

operating your inflatable boat.

Warranty Message

The  product  you  have  purchased  comes  with  a  

limited

warranty

 from Mercury Marine. The terms of the warranty are

set forth in the 

Warranty Information

 Section of this manual.

The  warranty  statement  contains  a  description  of  what  is

covered, what is not covered, the duration of coverage, how

to best obtain warranty coverage, 

important disclaimers and

limitations  of  damages,

 and  other  related  information.

Please review this important information.
The description and specifications contained herein were in

effect  at  the  time  this  manual  was  approved  for  printing.

Mercury  Marine,  whose  policy  is  one  of  continued

improvement, reserves the right to discontinue models at any

time,  to  change  specifications,  designs,  methods,  or

procedures without notice and without incurring obligation.

© 2006 Mercury Marine

Dynamic 260, 280, 310

90-899337001  806

Содержание Dynamic 260






































Отзывы: