S2000M MAINTENANCE
GUIDE
45
Current time is displayed by LCD in HH:MM format (hours and
minutes). Enter new time.
After changing time console forms two messages: ‘
TIME CHANGED
’ and ‘
TIME STAMP
’.
Message ‘
TIME CHANGED
’ informs when user has changed time. Message ‘
TIME STAMP
’ shows
user time value.
Date set
Type password.
Select ‘AUX FUNCTIONS’ menu item by ‘
4
’, ‘
3
’ and ‘ENT’
keys, or press hot key ‘6’.
Select ‘SET DATE’ menu item by ‘
4
’, ‘
3
’ and ‘ENT’ keys, or
press hot key ‘6’.
Current time is displayed on LCD in
ДД
.
ММ
.
ГГ
format (day,
month and year). Enter new date.
After date changing console forms two messages: ‘
DATE CHANGED
’ and ‘
DATE
’.
Message ‘
DATE CHANGED
’ informs when user has changed date. Message ‘
DATE
’ displays user
date value.
2.2.3.8
Printing event buffer
This function allows to print whole event buffer (last 1023 events).
Type password.
Select ‘AUX FUNCTIONS’ menu item by ‘
4
’, ‘
3
’ and ‘ENT’
keys, or press hot key ‘6’.
Select ‘PRINT LOG’ menu item by ‘
4
’, ‘
3
’ and ‘ENT’ keys,
or press hot key ‘3’.
2.2.3.9
‘S2000-IT’ phone communicator message buffer cleaning
If ‘S2000-IT’ phone communicator message transition speed is higher then phone line
message transition one, message buffer of ‘S2000-IT’ can be overflowed in short time. Normally
emptying of buffer can take a long time. Console can send command to empty message buffer
without event transition through phone line.
Type password.
Select ‘AUX FUNCTIONS’ menu item by ‘
4
’, ‘
3
’ and ‘ENT’
keys, or press hot key ‘6’.
Select ‘CLR COMM MSG’ menu item by ‘
4
’, ‘
3
’ and ‘ENT’
keys, or press hot key ‘4’.
Enter ‘S2000-IT’ phone communicator number (valid value
from 1 to 127), or select valid address value by ‘
4
‘, ‘
3
‘ key
and press ‘ENT’.
2.2.3.10
Alarm message indication reset
In alarm message indication mode console requires that user views all alarm messages.
Indication of each alarm message resets by ‘CLR’ key (see item 2.2.1). Console does not
transmit in time indication mode while all alarm messages are not viewed. If number of alarm
messages is too big (it is possible during mounting, defect of devices or ‘RS-485’ line) then each
message reset by ‘CLR’ key too tiresome. This function can reset indication of all alarm
messages in console buffer.
ENTER CODE:_
v
63 PRINT LOG
v
62 SET DATE
DATE: DD.MM.YY
v
6 AUX FUNCTIONS
ENTER CODE:_
v
64 CLR COMM MSG
v
6 AUX FUNCTIONS
ADDRESS:_
TIME: HH:MM
ENTER CODE:_
v
6 AUX FUNCTIONS
