bolid S2000-2 Скачать руководство пользователя страница 84

Страница: 84 / 100

Orion ISS

www.bolid.com

S2000-2 database, or the access group descriptor of an existing key is modified, the sounder will

sound two short signals, and the LED of the reader will be switched on for 2s (green color). Single

short sound and 1s long lighting of the green LED mean that the key belonging to the access group of

the Master key has already been saved in the S2000-2 memory. Long sound and triple blinking of the

red reader LED mean that key code saving was failed (the memory is full).

If 2 Factor Authentication is used by the reader, after receiving the main key code the controller will

ask to present an additional code, the reader LED starting flashing green 5 times per second. After-

wards a key (key code) presented to the reader within next 30s will be saved as the additional code

for the key that was presented before.

To exit key programming mode it is necessary to present the same Master key which was used to

activate the programming mode. Besides, the keys programming mode will be finished automatically if

no key is presented at the reader within 30s. The controller and reader sounders will generate three

short sounds and one long sound (the ‘Programming is finished’ melody), and the READY indicator

and the reader LED will start to light continuously.

If the keys of different access groups are to be added, programming keys of the second access group

(presenting a next Master key to a reader) must be started only after exiting keys with the first access

group programming mode. Otherwise the second Master key presented to a reader will be repro-

grammed as a User key of the first access group.

The hardware key programming (without the UProg Configuration Tool) has restricted by the follow-

ing:

−

It is impossible to program Unlocking, Locking, or Master keys with a non-zero access group

−

Validity of the programmed key can not be restricted

−

Using 2 Factor Authentication, it is impossible to program a simplified key without an additional

code

If keys are programmed with the help of the UProg Configuration Tool software all limitations men-

tioned above are not exist. Moreover, any key can be deleted or temporary locked. The possibility to

accompany key descriptors with text comments (owners names, for example) and save this informa-

tion in the PC files (text comments are not saved in the controller memory) considerably simplifies key

handling process.

In order to arm/disarm loops by means of a Proximity card or iButton, the card or the iButton must be

registered in the controller memory, included in the access group with the

User

attribute and specify-

ing the alarm loops which are allowed to be armed/disarmed by means of this access group key pre-

senting (see Access Group Parameters Section below).

Содержание S2000-2





































































































Результаты поиска

Содержание S2000-2

Отзывы:

Похожие инструкции для S2000-2

Бренды по названию

Популярные бренды

bolid S2000-2, Руководство пользователя

Результаты поиска

Содержание S2000-2

Отзывы:

Похожие инструкции для S2000-2

Бренды по названию

Популярные бренды