Orion ISS
www.bolid.com
18
vation Time
parameter, but at least for two seconds, regardless of the time the passing actually
takes
In order to pass in both directions, a User identifier with the
Access
attribute is to be presented to a
reader mounted near the entrance/exit.
If the identification process is completed successfully, the reader sounder generates two beeps, the
green LED lights, the door is opened (unlocked) and the ACCESS GRANTED message is generated
with the code of key presented included.
If this reader uses two factor authentications, the reader green LED starts flashing 5 times per second
and access is granted only after an additional code having been identified (see Two Factor Authenti-
cation Section of this Manual).
If two or three person access rule is applied, while identifying the key access is granted after all par-
ticipants of the access procedure having been identified (see Passage Modes and Two or More Per-
son Rule Access Control Section of this Manual).
After opening the door the reader LED enters its normal mode (is off or lit with red) and the PASSAGE
message is generated with the code of the presented key involved.
The procedure of passing backward is similarly, except two factor authentication (which is adjusted for
each reader separately) and two (three) person access rule applying (which is specified for each ac-
cess group).
Turnstile Mode
In this mode the controller provides access via one access point (electromechanical turnstile)
equipped with two control circuits for each passing direction separately, with granting access in each
direction requiring presenting keys to the readers installed from the both sides of the turnstile.
EXIT buttons can also be used to grant access remotely, e.g. from a guard post.
Standard time to pass after access being granted is 10 seconds.
Anti-passback rules can be checked for such an operation mode, as identification is required for pass-
ing in both directions and only one person can pass when access is granted.
No passage detector (rotation sensor) can be used. But in this case no passage event is generated,
so it is impossible to use anti-passback and time&attendance utilities of Orion workstation. Besides, in
this case the minimal passage time is equal to two seconds (only after expiration of this time the next
key can be taken into account by the controller). If passage sensors are in use, the turnstile capacity
(pedestrian throughput) can be increased as the next key will be read and identified by the controller
immediately after passing having been detected.
Содержание S2000-2
