TREADMILLS – OWNER’S MANUAL
43
6. Press this button and hold it down for 3 seconds. The platform will start moving (up). As soon as the platform starts
moving, release the button and the calibration will perform on its own (it will last close to 1 minute).
7. When the calibration is completed, turn the power OFF with the ON/OFF switch and disconnect the treadmill from the
wall outlet.
8. Put back the motor cover on the treadmill and replace the 4 screws. Turn the power ON with the ON/OFF switch in front
of the treadmill, replace the safety key and your machine is ready to go.
WARNING –
Do not stand on the belt during this procedure. The treadmill will reach a 15% incline. If for any reason you
must stop the test, turn the power OFF with the ON/OFF switch. If this procedure got interrupted, do not use the treadmill. It
is important to fully complete the elevation calibration procedure before using the treadmill.
Содержание T240C
Страница 2: ......