Bodyguard T240C, Руководство пользователя

Страница: 15 / 48

TREADMILLS – OWNER’S MANUAL
15
T240P-T240C-T300-T460XC-T500:
The total exercise parameters will loop until you press the
STOP key to exit back to the welcome screen. If you do not wish
to view the exercise parameters, press the STOP key to return to the welcome screen.
1.2.5. Saving an exercise (Memory)
Once a program has ended or has been stopped prematurely, the user can save up to 20 speed and incline levels, and
repeat them later. This function is very useful when an exercise is particularly interesting and motivating. With all the
treadmills (except the T240S), you can create a program or modify an existing one and then save it for future use, including
the
Heart Rate Control program . The treadmills offer a unique option to save and resume a Heart Rate Control program
without the use of a chest strap.
Saving a program enables the computer to save 20 speed and incline levels done during the exercise. The speed and
incline parameters are saved at the end of each on-screen segment. The T240P-T240C-T300-T460XC-T500 allows you to
create a program or modify an existing one to your specifications, save it and restore it from the memory at a later time.
When an exercise program is over or prematurely stopped, the exercise parameters are displayed and the menu offers you
the opportunity to save your exercise. This option is displayed in abbreviated form: SAVE PRESS ENTER followed by NOT
PRESS STOP. If you wish to save the exercise, simply press the
JustGo
TM
key and, if you don’t wish to save it, simply
press the STOP key. . If you choose to save the program a message will indicate under what name your exercise was
saved.
If you wish to save your exercise at the end of the program, T240P-T240C-T300-T500 treadmills have four (4) spaces
available for saving individualized exercise programs and the T460XC has eight (8) spaces available.
1. Press the JustGo
TM
key when the parameters travel across the screen.
2. The treadmill will indicate under which name the program was saved.
NOTE –
If all the available spaces are taken, press the INCREASE/DECREASE SPEED keys to select the space you wish
to overwrite. Press the JustGo
TM
key to accept.
1.2.6. Using the iTek key
The new iTek key will be functional differently in two (2) circumstances.
If you are in the welcome screen mode, you can have access to the SETTINGS Menu and the DIAGNOSTICS Menu. To
access the SETTINGS Menu, press the
iTek button one time (see section 2 for the settings information). To access the
DIAGNOSTICS Menu, hold the iTek button for 3 seconds (see section 5 for the diagnostics information).
If you are exercising in a program and you press the
iTek button, the display will show information about the average current
drawn by the motor in the following format.
CURRENT (XX.X): Shows the average current drawn by the main motor from the drive.
NOTE – If you want to stop seeing the current reading, simply press the iTek button again.