Bodyguard T240C, Руководство пользователя

Страница: 38 / 48

TREADMILLS – OWNER’S MANUAL
38
5. COMPUTER DIAGNOSTICS
Accessing the DIAGNOSTICS Menu on a T240S:
1. Turn power OFF.
2. Simultaneously hold down the
INCREASE/DECREASE SPEED keys and turn power ON.
3. Release the INCREASE/DECREASE SPEED keys once you are in the DIAGNOSTICS Menu.
When you access the DIAGNOSTICS Menu, you will notice the central window will display “dIAG” and the top right hand
side window will display “1.OX” where “1.OX” is the version of the software installed in your computer display monitor. This
information is helpful in diagnosing certain computer-related conditions. Keep in mind that the version number may change
depending on the model number of your treadmill.
Accessing the DIAGNOSTICS Menu on a T240P-T240C-T300-T500:
1. Turn power OFF.
2. Simultaneously hold down the
INCREASE/DECREASE SPEED keys and turn power ON.
3. Release the INCREASE/DECREASE SPEED keys once you are in the DIAGNOSTICS Menu.
4. Press the JustGo
TM
key to access the detailed items.
When you access the DIAGNOSTICS Menu, the following message will appear as follows: “T240 version X.XX”. The
message indicates the version of the software installed in your computer. This information is helpful in diagnosing certain
computer-related problems. Keep in mind that the version number can change depending on the model of your treadmill.
Accessing the DIAGNOSTICS Menu on a T460XC:
1. Hold the
iTek key for 3 seconds to have access to the DIAGNOSTICS Menu.
To perform any of the above tests, except the INCLINE CALIBRATION TEST, press the INCREASE/DECREASE SPEED
keys to select the one you want and press the JustGo
TM
key to accept.
Diagnostics T240S
T240P-T240C-
T300-T500
T460XC
5.1 NVRAM Test - 5.1 5.1
5.2 Keypad Test 5.2 5.2 5.2
5.3 Display Test - 5.3 5.3
5.4 Sound Test - 5.4 5.4
5.5 Heart Rate Test - 5.5 5.5
5.6 Safety Key Test - 5.6 5.6
5.7 Belt Alignment Test 5.7 5.7 5.7
5.8 Motor Test - 5.8 5.8
5.9 Current Test 5.9 5.9 5.9
5.10 ESC Test - - 5.10
5.11 Speed Sensor Test - 5.11 5.11
5.12 Error Log 5.12 5.12 5.12
5.13 Maintenance 5.13 5.13 5.13
5.14 Statistics 5.14 5.14 5.14
5.15 Incline Calibration 5.15 5.15 5.15