BOC Edwards Temescal SuperSource2 STIH-270-2PT, Руководство пользователя

Страница: 22 / 102

2.2 IN STAL LA TION REQUIREMENTS
Feedthroughs
The feedthroughs listed be low are re quired for in stal la tion of the source. They are avail able from Temescal.
See sec tion 1.4 for de scrip tions and or der ing num bers.
•
One air/wa ter feedthrough
•
One oc tal feedthroughs rated for 6 A at 600 V
•
Two high-volt age feedthroughs rated for 1.5 A at 12 kV dc and 70 A at 12 V ac
•
One ro tary-mo tion feedthrough.
Ad di tional Com po nents
•
Tubing for con nect ing the wa ter feedthrough to the source. Use 3/8" (9.5 mm) OD tub ing made of
type-304 stain less steel or cop per.
•
Tubing for con nect ing the air lines to the pneu matic cyl in der. Use 1/8” (3.18-mm) tub ing made of
Type 304 stain less steel.
•
Two 3/8" OD rub ber fer rule fit tings. These at tach to the wa ter feedthrough’s at mo sphere-side tub ing and
can be re moved from the tub ing with out dam ag ing it. (Avail able from Temescal; or der PN 3763-6809-0.)
•
Two 3/8" OD barbed con nec tors, which con nect to the ex ter nal wa ter sup ply and re turn hoses. (Avail -
able from Temescal; or der PN 3780-3088-6.)
•
Two 45°
×
3/8" NPT flare con nec tors. Each of these at ta ches to a rub ber fer rule fit ting on one end and
to a barbed hose con nec tor on the other. (Avail able from Temescal; or der PN 3770-4964-0.)
•
An air in stal la tion kit (avail able from Temescal, or der PN 0627-3010-0)
•
#16-AWG Kapton wire to con nect the oc tal feedthrough to the de flec tion coil. (Avail able from
Temescal; or der PN 6342-1916-1.)
•
High-tem per a ture lugs for con nect ing the Kapton wire to the ter mi nals on the de flec tion coil. (Avail -
able from Temescal; or der PN 6044-0359-0.)
•
Bare #6-AWG flex i ble cop per wire for con nect ing the high-volt age feedthroughs to the emit ter as -
sem bly. Ready-made fil a ment leads, com plete with ter mi na tion hard ware on both ends, are sup plied
with the source.
•
High-volt age ca ble for con nect ing the at mo sphere side of the high-volt age feedthrough to the gun fil a -
ment trans former. This ca bling is gen er ally sup plied with the elec tron-beam power sup ply. For us ers
who do not have this highly spe cial ized ca ble on-hand, a com plete ca ble as sem bly is avail able from
Temescal (or der PN 0040-8140-0). This as sem bly in cludes ap pro pri ate ter mi na tion hard ware on both
ends of the ca ble and con nec tors and brack ets for se cur ing the ends of the ca ble.
•
A sys tem for ro tat ing the cru ci ble. For man ual-drive sys tems, this sys tem will in clude a mech a nism for
ro tat ing the cru ci ble, a means of in dex ing this mech a nism to the cor rect evap o ra tion or `home’ po si -
tion for the ex posed pocket, and hard ware for con nect ing the in dex/drive mech a nism to the at mo -
sphere side of the ro tary-mo tion feedthrough. For au to mated in dex ing, Temescal’s TRC-3460 Tur ret
In dexer Con trol ler is rec om mended. For best re sults with ei ther man ual or au to mated tur ret drive, use
flex i ble cou plings (PN 9015-0121-1) when mak ing con nec tions to both ends of the ro tary-mo tion
feedthrough.
Installation
2-2 0101-9004-0A STIH-270-2PT