BMW 5 SERIES - CATALOGUE, Руководство пользователя

Страница: 98 / 337

Display in the instrument cluster
When the drive-ready state is
switched on, READY is dis‐
played in the instrument cluster.
Switching off drive-ready state
Steptronic transmission
1. Engage selector lever position P with the
vehicle stopped.
2. Press the Start/Stop button.
The engine is switched off.
3. Set the parking brake.
Before driving into a vehicle wash
So that the vehicle can roll into a vehicle wash,
observe instructions for going into an auto‐
matic vehicle wash, refer to page
309 .
Auto Start/Stop function
Concept
The Auto Start/Stop function helps save fuel.
The system switches off the engine during a
stop, for instance in traffic congestion or at
traffic lights. Drive-ready state remains
switched on. The engine starts automatically
for driving off.
General information
After every engine start via the Start/Stop but‐
ton, the Auto Start/Stop function is activated or
deactivated, according to the last setting, refer
to page
100 . If the Auto Start/Stop function is
active, it is available as soon as a speed of ap‐
prox. 3 mph/5 km/h is exceeded.
Depending on the selected driving mode, refer
to page
112 , the system is automatically acti‐
vated or deactivated.
Engine stop
Functional requirements
Steptronic transmission
The engine is switched off automatically dur‐
ing a stop under the following conditions:
▷ The selector lever is in selector lever posi‐
tion D.
▷ The brake pedal remains pressed while the
vehicle is stationary or the vehicle is held
by Automatic Hold.
▷ The driver's safety belt is buckled or the
driver's door is closed.
Steptronic transmission: manual
engine stop
If the engine was not switched off automati‐
cally when the vehicle stopped, the engine can
be switched off manually:
▷ Press the brake pedal forcefully again from
the current pedal position.
▷ Engage selector lever position P.
If all functional preconditions are fulfilled, the
engine switches off.
Air conditioner when the engine is
switched off
The air flow from the air conditioner is reduced
when the engine is switched off.
Displays in the instrument cluster
General information
The display in the tachometer
indicates that the Auto Start/
Stop function is ready for an Au‐
tomatic engine start.
Seite 98
Controls Driving
98
Online Edition for Part no. 01 40 2 976 346 - X/16