BMW 5 SERIES - CATALOGUE, Руководство пользователя

Страница: 133 / 337

Daytime running lights
General information
In some countries, daytime running lights are
mandatory, so it may not be possible to switch
the daytime running lights off.
Switching on/off
Position of switch: , ,
The daytime running lights light up when
drive-ready state is switched on. After drive-
ready state is switched off, the parking lights
light up in position
.
Using iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. Select the desired setting.
The setting is stored for the driver profile cur‐
rently used.
Adaptive Light Control
Concept
Adaptive Light Control is a variable headlight
control system that enables dynamic illumina‐
tion of the road surface.
General information
Depending on the steering angle and other pa‐
rameters, the light from the headlight follows
the course of the road.
To avoid blinding oncoming traffic, the Adap‐
tive Light Control does not swivel to the driv‐
er's side when the vehicle is at a standstill.
Depending on the equipment version, Adap‐
tive Light Control consists of one or several
systems:
▷ Cornering light, refer to page 133 .
Activating
Position of switch:
The Adaptive Light Control is active, when the
drive-ready state is switched on.
Cornering light
In tight curves, for instance on mountainous
roads or when turning, an additional, cornering
light is switched on that lights up the inside of
the curve when the vehicle is moving below a
certain speed.
The cornering light is automatically switched
on depending on the steering angle or the use
of turn signals.
When driving in reverse, the cornering lights
may be automatically switched on regardless
of the steering angle.
Self-leveling headlights
The self-leveling headlights compensate for
acceleration and braking operations in order
not to blind the oncoming traffic and to achieve
optimum illumination of the roadway.
High-beam Assistant
Concept
The high-beam Assistant detects other traffic
participants early on and automatically
switches the high beams on or off depending
on the traffic situation.
General information
The high-beam Assistant ensures that the high
beams are switched on, whenever the traffic
situation allows. In the low speed range, the
high beams are not switched on by the system.
The system responds to light from oncoming
traffic and traffic driving ahead of you, and to
adequate illumination, for instance in towns
and cities.
Seite 133
Lights Controls
133
Online Edition for Part no. 01 40 2 976 346 - X/16