BMW Motorrad C 400GT, Руководство пользователя для мотоциклиста

Страница: 167 / 248

ging the battery on the follow-
ing pages
Do not turn the battery upside
down
ATTENTION
On-board electronics (e.g.
clock) draining connected
battery
Battery is deep-discharged; this
voids the guarantee
Connect a float charger to the
battery if the motorcycle is to
remain out of use for more
than four weeks.
Jump-starting
ATTENTION
Excessive current when
jump-starting the Scooter
Cable fire or damage to the
vehicle electronics
Do not jump-start the Scooter
using the socket; only use the
battery terminals.
ATTENTION
Contact between crocodile
clips of jump leads and
vehicle
Risk of short-circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
Jump-starting with a voltage
greater than 12 V
Damage to the on-board elec-
tronics
Make sure that the battery of
the donor vehicle has a voltage
rating of 12 V.
Make sure the ground is level
and firm and place the Scooter
on its stand.
Removing battery cover
(
170).
Removing the battery holder
(
168).
Begin by connecting one end
of the red jump lead to the
positive terminal of your own
vehicle and the other end to
the positive terminal of the
second vehicle.
Connect one end of the black
jump lead to the negative ter-
minal of your own vehicle and
the other end to the ground
point or the negative terminal
of the second vehicle.
Run the engine of the donor
vehicle during jump-starting.
NOTICE
Do not use proprietary start-as-
sist sprays or other products to
start the engine.
Start the engine of the vehicle
with the discharged battery
10
165
z Maintenance