BMW Motorrad C 400GT, Руководство пользователя для мотоциклиста

Страница: 130 / 248

Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
ASC indicator and warning
light flashing slowly.
Phase 2
Drive off test of the system
components with diagnostic
capability.
ASC indicator and warning
light flashing slowly.
ASC self-diagnosis
completed
The ASC symbol no longer
shows.
Check all the warning and in-
dicator lights.
ASC self-diagnosis not
completed
The Scooter has to reach a
defined minimum speed with
the engine running for the
wheel speed sensors to be
checked:
min 5 km/h
If an indicator showing an ASC
fault appears when ASC self-
diagnosis completes:
You can continue to ride. Bear
in mind that the ASC is not
available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
Retailer.
If the ASC is making
adjustments where not
required, too often or too early,
the troubleshooting chart can
help further. (
191)
Riding
At engine speeds below approx.
1500 rpm, the centrifugal clutch
remains open; the Scooter is in
idle. If the engine speed is in-
creased, the clutch closes and
the Scooter drives off.
In the speed range between
approx. 50 km⁄h and approx.
120 km⁄h the engine accelerates,
with the throttle valve fully
opened, with gently increasing
speed in the range of the
maximum torque. The change
in speed is achieved by the
CVT. There is therefore minimal
change in the engine noise in
this speed range.
Speeds above approx. 120 km⁄h
are achieved by increasing the
engine speed.
8
128
z Riding