BMW Motorrad C 400GT, Руководство пользователя для мотоциклиста

Страница: 103 / 248

not possible to ensure fault-
free communications in every
situation.
Possible sources of
interference:
Interference zones due to
transmission masts and similar
Devices with non-compliant
Bluetooth implementations
Proximity of other Bluetooth-
compatible devices
Bluetooth coupling
Two Bluetooth devices must de-
tect each other before they can
create a connection with each
other. This process of mutual
detection is known as "coupling".
When two devices have coupled
they remember each other, so
the Bluetooth coupling process
is conducted only once, on initial
contact.
NOTICE
On some mobile devices, e.g.
those with iOS operating sys-
tems, the BMW Motorrad Con-
nected App must be opened be-
fore use.
During the Bluetooth coupling
process, the TFT display
searches for other Bluetooth-
capable devices within its
reception area. The conditions
that have to be satisfied before
the audio system can recognise
another device are as follows:
The Bluetooth function of the
device must be activated
The device must be "visible" to
others
The device must support the
A2DP profile
Other Bluetooth-compatible
devices must be OFF (e.g.
mobile phones and navigation
systems).
Please consult the operating in-
structions for your communica-
tion system.
Perform Bluetooth pairing
Call up the
Settings
,
Con-
nections
menu.
Bluetooth connections can
be established, managed and
deleted in the
CONNECTIONS
menu. The following Bluetooth
connections are displayed:
Mobile device
Rider's helmet
Passenger helm.
The connection status for mobile
end devices is displayed.
Connect mobile end
device
Perform Bluetooth pairing
(
101).
5
101
z TFT display