25
BA-077/1EN M6X.20XX
3 - How to operate the machine
3.8 - Horizontal drilling
Important
Particular care must be taken when working on sections that jut out
over the work table. Use extensions.
Note
Horizontal drilling is only possible with a closed horizontal drilling cover
• Set the horizontal hold down clamp
(E21)
to the down position
• Set hold down clamp
(E14)
• Set the drilling distance
(E25)
• Set drilling depth
3.8.2) Switch settings on the operator panel
• Turn on extraction system
• Set main switch
(E1)
to Pos.
I
• Set mode switch
(E2)
to Pos.
I
(operation)
• Set hold down clamp
(E4)
to Pos. (clamp on)
3.8.1) Drilling side holes
• Insert the horizontal ruler
• Set work top to Pos. “H”
(E11)
!
!