25
Task
Procedures
Illustrations
SubTiller II
Assembly (Coulter)
Placing
machinery
bushing
on coulter
shank
Attaching
20” fluted
blades to
coulter
assembly
1. Remove hex cap screws from
coulter hub.
2. Place
(AP2701)
20” fluted
coulter blade on coulter
assembly and replace hex
cap screws.
3. Install
(BP3205)
2-1/2” x 1-3/4”
machinery bushing over
(AM2735)
16” coulter shank
weldment.
4. Insert the 16” coulter shank
into coulter assembly. Start
(BP3519)
3/8” x 2-1/2” roll
pin in base of coulter shank.
Insert the
(BP3534)
7/32” x
2/1/2” roll pin in the end of
the 3/8” roll pin and drive
both pins together. Leave an
equal amount of pin on both
sides of the shank.
5. Install the (
BP3162)
3/8” x 2”
roll pin through the top hole.
7/32” x 2-1/2”
roll pin
3/8” x 2-1/2”
roll pin
3/8”x2” roll pin
Machine bushing
Coulter assembly
Coulter shank 16”
Attaching
shank to
coulter
assembly
Installing
roll pin in
shank
Preparing
coulters
for
mounting
AAM2728 COULTER, SUPER 1200, 16”, 1 ROW
BOM ID
Qty
Item No
Description
1
1
AM2735
COULTER SHANK, 16”
2
1
AM2799
ASSEMBLY, COULTER ARM WITH HUB & KNEE CASTING
3
1
BP3162
PIN, ROLL, 3/8” X 2”, PLATED
4
1
BP3205
MACHINERY BUSHING, 2-1/2” OD X 1-3/4” ID, 10 GAUGE, PLATED
5
1
BP3519
PIN, ROLL, 3/8” X 2-1/2”, PLAIN
6
1
BP3534
PIN, ROLL, 7/32” X 2-1/2”, PLAIN