11
Task
Procedures
Illustrations
SubTiller II
Changing Points
The fall and summer points should rest
flatly on metal shims placed between the
lower shank and the point.
Do not tighten
with impact wrench
. Over tightening can
cause damage to point.
Coulters
Coulter should be adjusted to slice 3” to 4”
deep during operation. Running coulters
too deep may result in premature bearing
failure. Grease coulter pivot shaft gener-
ously and often.
The Soil Probe
A soil probe is an effective way to test for
compacted soil. The ideal time to check
conditions is when the soil is at maximum
moisture capacity. At this time you can most
easily find out if a compacted zone exists.
By applying steady pressure on the probe,
a stronger resistance should be felt through
the compacted layer.
Operating Instructions