Task
Procedures
Illustrations
64
SubTiller II
Shank Wear Plate Kit
Installing
shank
wear plates
1. Place
(1) (EM6208)
ST shank
wear plate on both sides of the
shank. Plates should touch
weld on the foot of the shank.
2. Position the plates 1/2” back
from the leading edge of the
shank. Clamp plates and spot
weld the rear of the plate in
three places.
3. Weld continuous bead down the
front of the wear plate.
Spot Weld
Continuous Weld
1/2”
Wear Plate