Task
Procedures
Illustrations
26
SubTiller II
Assembly (Coulters)
Mounting
coulters
1.
Mark out rows on toolbar and
center
(a) (AM24034)
ST
flatbacks on marks. Insert
(b) (BP3047)
3/4”-10 x 4”W x
7-3/4”L, u-bolts.
2. Secure u-bolts with
(d) (BP3035)
3/4” lock washers and
(c)
(BP3034)
3/4” hex nuts.
3. Place
(e) (AAM2728)
Super
1200 coulter assembly into
bracket. Insert
(f) (BP3229)
1/2”-13 x 2-1/2”, grade 5 carriage
bolts.
4. Install
(g) (BP3043)
1/2” lock
washers and (
h) (BP3042)
1/2”
hex nuts.
5. Raise coulter shank assembly
in bracket and place a 3”
spacer between the roll pin
and the top of the bracket
Tighten the 1/2” hex nuts.
This height is a starting point.
a
AM24034
b
BP3047
c
BP3034
d
BP3035
e
AAM2728
f
BP3229
g
BP3043
h
BP3042