Blaupunkt TravelPilot Lucca 5.2, Инструкции по эксплуатации и монтажу

Страница: 31 / 48

TMC function
31
The route is recalculated and the blocked
route segment is evaded. The blocked seg-
ment is marked in red.
Unblocking
Briefl y touch any position on the map.
Select the Block road entry.
The road blocking is cancelled and the navi-
gation uses once again the original calculated
route.
쏅
쏅
TMC function
The Traffi c Message Channel (TMC) supplies your
Lucca with traffi c reports that are broadcast by
the radio stations with the RDS (Radio Data Sys-
tem) signal.
The broadcast traffi c reports can be included in
the route calculation by the Lucca. In case of traf-
fi c obstructions on the calculated route, they are
utilised for calculating an alternate route.
This allows the Lucca to present a dynamic naviga-
tion that is adjusted to the traffi c situation.
TMC is available in the following countries: Aus-
tria, Belgium, Czech Republic Denmark, Germa-
ny, England, Finland, France, Italy, Netherlands,
Norway, Spain, Sweden, and Switzerland.
Connecting the TMC antenna
Connect the supplied TMC antenna to the
TMC antenna input
?
on the rear side of the
Lucca.
Attach the TMC antenna with the suction
cups as parallel as possible to the instrument
panel.
The Lucca can now receive traffi c reports, if
available.
Setting the TMC function
On the second page of the navigation menu,
touch the
Settings
button.
The Settings menu is displayed.
Touch the TMC button.
The TMC menu is displayed. The TMC function
for the route change can be used in this two
ways:
Automatic: The Lucca automatically changes
the destination guidance as soon as it re-
ceives information about traffi c obstructions.
With confi rmation: The Lucca suggests
changing the destination guidance as soon as
it receives information about traffi c obstruc-
tions. The suggested route changes must be
confi rmed individually.
쏅
쏅
쏅
쏅
•
•
Lucca_5_2_long_1_GB.indd Abs1:31 Lucca_5_2_long_1_GB.indd Abs1:31 07.12.2006 11:26:47 Uhr 07.12.2006 11:26:47 Uhr