Blaupunkt TravelPilot Lucca 5.2, Инструкции по эксплуатации и монтажу

Страница: 9 / 48

Installation in the Vehicle
9
Installation in the Vehicle
For temporary installation in a vehicle, the Lucca
features a suction cup holder with a suction cup to
attach it to the windshield.
Caution:
Install the Lucca so that it does not block your view
and does not distract from the traffi c.
Do not install the Lucca in the airbag deployment
area.
Ensure that the Lucca does not pose a threat to
passengers in the vehicle in case of emergency
braking.
Attaching the Support
The Lucca can be installed in the vehicle in a sim-
ple way using the supplied suction cup holder.
Locate a suitable place for installing the Lucca.
To ensure a perfect hold, the glass must be
free of dust and oil. If necessary, clean the
glass fi rst using a lens cleaning tissue.
Press the suction plate of the support against
the glass.
Push the lever on the suction support towards
the glass.
The holder can now be adjusted. The track
for mounting the Lucca must be aligned ver-
tically.
Removing the Support
If you change vehicles, you can simply remove the
support.
Push the lever on the suction support away
from the glass.
Carefully loosen the suction plate at the edge
from the glass so that air can enter between
suction cup and glass.
Carefully pull the suction cup off of the glass.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Attach the Connect Cradle
The suction cup holder features a mount for the
Connect Cradle. The Connect Cradle expands the
functions of the Lucca. The chapter "Connect Cra-
dle" provides information about connecting the
Connect Cradle to your car sound system.
Snap the Connect Cradle with the suction cup
holder into position.
Installing Lucca in the Connect Cradle
The Lucca features an opening on the underside
for mounting the Connect Cradle.
Detach the elastic cover on the underside of
the housing.
Place the Lucca on the mount of the Connect
Cradle and snap the Lucca to the rear and into
position.
Removing the Lucca
Press the lever of the Connect Cradle at the
rear side of the Lucca and pull the Lucca to
the front.
Remove the Lucca to the top and out of the
Connect Cradle.
To protect the contacts, you can apply the elastic
cover and dummy SD card again after using the
Lucca.
쏅
쏅
쏅
쏅
쏅
Lucca_5_2_long_1_GB.indd 9 Lucca_5_2_long_1_GB.indd 9 07.12.2006 11:26:41 Uhr 07.12.2006 11:26:41 Uhr