Blaupunkt TravelPilot Lucca 5.2, Инструкции по эксплуатации и монтажу

Страница: 10 / 48

10
Switching on/off | Controls
Switching on/off
Initial switch-on
During the initial switch-on of the Lucca, the soft-
ware is loaded into the system. For this reason,
the switch-on process
may last up to one minute.
The initial destination guidance also requires
some more time than usual.
Switch-on
To switch on the Lucca, press the button
3
.
The device switches on. (If the device is in
the idle state, the previously active display is
shown again).
Activating the idle state
To activate the idle state, briefl y push the but-
ton
3
below the display.
The Lucca switches to the idle state.
Switch-off
To switch off the device, press and hold the
button
3
for longer than three seconds.
The Lucca is switched off.
Note:
A switch-off of the Lucca is only necessary if
you do not operate the device for an extended
period of time. Still, the Lucca requires a lit-
tle bit of current even in the switch-off state.
Hence, it is possible that the battery must be
recharged after an extended period of time.
쏅
쏅
쏅
Controls
Basic buttons
Touch the touch slider
6
up to scroll up in
the list by one page (5 elements).
Touch the touch slider
6
down to scroll down
in the list by one page (5 elements).
To scroll in a list, move your fi nger along the
touch slider
6
.
Note:
If the list features more than fi ve elements,
the scroll bar indicates the current position
in the list.
: Touch this button to return to the en-
try without selecting a list element.
: Touch this button to change to the
next page in the menu.
More : Touch this button to obtain access to
additional functions. Depending on the menu
in which you are currently located, different
functions are offered.
Software keyboard
If text entries are required, the touchscreen dis-
plays a software keyboard. You can perform all
the entries on the touchscreen by touching the
respective symbol with your fi nger. You can only
enter capital letters.
You do not have to enter any special characters or
umlauts when entering city or street names. The
Lucca completes these characters automatically.
Entering Blank Spaces
Touch the button to enter a blank space.
Entering numbers
Touch the button.
The numeric keypad is displayed.
Touch one of the number symbols to enter a
number in the text fi eld.
To change back to the character keyboard:
Touch the button.
•
•
•
•
•
•
쏅
쏅
쏅
쏅
Lucca_5_2_long_1_GB.indd 10 Lucca_5_2_long_1_GB.indd 10 07.12.2006 11:26:41 Uhr 07.12.2006 11:26:41 Uhr