Blastrac BMC-335EHY, Руководство по эксплуатации

Страница: 24 / 42

24
5.4 Switching off the machine EHY and GHY versions
Switch off the machine EHY
 Pull the quick lift lever up and turn the fine adjustment until the blades do not hit the ground anymore.
 Push both red buttons on the electrical box.

Wait until all turning parts have reached a standstill.
 Switch off the dust collector.
 Disconnect the power supply.
 Pay attention that all twisting and turning machine parts have reached a standstill before inspection or
maintenance duties are carried out.
Switch off the machine GHY
Versions up to serial number: 25697B (11-2018)
 Pull the quick lift lever up and turn the fine adjustment until the blades do not hit the ground anymore.
 Push the speed control lever all the way to the "Stop" position. (see photo )
Photo speed control lever. Stop position.

Wait until all turning parts have reached a standstill.
 Remove the starting key.

Seal the ignition lock with the protective cap.
 Switch off the dust collector.
 Turn the earth switch into a horizontal position (pos. E page 19). See photos below.
 Pay attention that all twisting and turning machine parts have reached a standstill before inspection or
maintenance duties are carried out.