15
4.4
Mounting the diamond blades
Make sure all moving parts of the machine have come to a complete standstill before mounting the blades.
-Pull out the main plug of the machine.
-Pull out the key of the deadman’s switch and put it in your pocket.
Warning!
Always wear Personal Protective Equipment!
The dust can be hazardous to the health!
ALWAYS wear a dust mask!
ALWAYS wear protective gloves during mounting or
dismounting the blades!
A.
Loosen the 4 bolts of the side plate
B.
Remove the side plate (2)
Slide the hexagon clamp bush with the stud bolts (1) over the hexagon axle until it is about 3mm from
the end of the axle. Tighten both bolts (2) very tight, It is advisable to use a locking solution such as
Loctite 243 on these bolts.
A B
