16
Assemble the spacer rings (3) and diamond blades (4) one by one over the axle until the end of the drum.
There has to be at least one spacer ring between the diamond blades.
NOTE:
80 sawing blades is always the maximum allowed amount of blades on the drum for EHY
54 sawing blades is always the maximum allowed amount of blades on the drum for GHY
BMC-335 EHY
BMC-335 GHY
Width of
sawing
[mm]
Qty. of
blades
Qty. of
Spacer ring
2.5mm
Qty. of
blades
Qty. of
Spacer ring
2.5mm
340
80
85
54
103
300
71
92
54
103
250
59
100
54
103
200
47
108
47
108
150
35
116
35
116
100
24
125
24
125
50
12
133
12
133
For a finer sawing result:
Replace the normal standard Spacer ring 2.5mm (E06079) by Spacer ring 1.0mm (E07497).
For a coarser sawing result:
Replace the normal standard Spacer rings 2.5mm (E06079) by Spacer ring 3.0mm (E07549).
Clamp all diamond blades and spacer rings together by turning 2 lock nuts (5) at the end of the tap ends
(6). Make sure that there are at least 2 spacer rings at the end of the drum.
Mount the side plate. A side plate which is incorrectly mounted or mounted
with force will shorten the lifetime of the drum bearings.
Always check the belt tension after mounting a drum (see chapter 6.3)
Never use the machine without a side plate or with an incorrect mounted side plate!
