HDC-5016 IP to QAM Modulator User Manual
Date 29. Dezember 2017
BLANKOM-HDC-5016_IP2QAM-modulator-V1.1-RR-12-2017.docx
13
Uncheck PID remap and CA filter to keep the original stream for pass through mode.
Remark: The Output max Data rate depends on the modulator output settings of this QAM channel:
256QAM, SR=7000 = > 51Mb/s.
These settings can be well prepared before you configure the Input-TS in the Modulator section to avoid
TS overflows because the modulator outputs were set to low values like 64QAM and low SR.
After we have configured an Input STREAM, change to GENERAL first to stream the complete TS to the