HDC-5016 IP to QAM Modulator User Manual
Date 29. Dezember 2017
BLANKOM-HDC-5016_IP2QAM-modulator-V1.1-RR-12-2017.docx
3
Chapter 2: Connection Description
2.1 Front & Rear panel
Front:
NMS/CAS: Network management port and CAS data port
Rear left
RF output port
…
Reset IP: Reset webmaster IP address, recover it to default IP address
…
Link/Act Indicators in RJ45 connectors
Data 1/2 GbE Input/Output
…
Power switch, Fuse
…
AC IEC Power Socket
Rear right
Grounding
Chapter 3 Installation Guide
3.1 Acquisition Check
When you opens the package of the device, it is necessary to check items according to packing
list. Normally it should include the following items:
HDC-5016 IP QAM Modulator
User’s Manual (online download from www.blankom.de)
Power Cord and grounding wire (depending on country)
3.2 Installation Preparation
When you install the device, please follow the steps below. The details of installation will be
described after this chapter. Users can also refer to the rear panel chart during the installation.
The main steps of the installation include:
Checking the possible device missing or damage during the transportation
Preparing relevant environment for installation
Installing the IP Mux-Scrambling QAM Modulator