HDC-5016 IP to QAM Modulator User Manual
Date 29. Dezember 2017
BLANKOM-HDC-5016_IP2QAM-modulator-V1.1-RR-12-2017.docx
22
Parameters → Modulator:
From the menu on left side of the webpage, clicking ‘Modulator’, it will display the interface as Figure-
11 where to set RF output parameters.
Figure-11
Set QAM Mode (Annex A/C = Normal DVB, Annex B = US Norm), mode 16…256 QAM and other
values. This Quick setup configures adjacent channel from a start frequency.
To individually configure the other 63 channels set them accordingly in every single config
mode.
The
CENELEC Channel-Plan
would be very helpful.
See following hints.
Consider the center/middle frequencies for setup the QAM channels please.
Click to set each
single channel
RF QAM output
parameters
Click to set all
channels RF
QAM output
parameters
