HDC-5016 IP to QAM Modulator User Manual
Date 29. Dezember 2017
BLANKOM-HDC-5016_IP2QAM-modulator-V1.1-RR-12-2017.docx
6
Figure-1
4.2 Operation
Remark: The user should be familiar with DVB-MPEG and PSI/SI information and its PID and Table
construction and norms. Many tables are cross referencing to other tables (example: EIT and SDT, PMT, …).
Information can be grabbed from: https://www.dvb.org/standards
4.2.1 Summary
When the login has been confirmed, it displays the summary status as in Figure-2:
Figure-2
4.2.1.1 Setting Date and Time
The device supports setting of Date and Time by a) browser you are using to the web-IF – so
your computer. But for the correct Time and Date it is almost better to configure time zone +
NTP servers:
You can select any
item here to enter
the corresponding
interface to check
information or set
the parameters.
