background image

                                                                                     

HDC-5016  IP  to  QAM  Modulator  User  Manual 

 

Date 29. Dezember 2017 

BLANKOM-HDC-5016_IP2QAM-modulator-V1.1-RR-12-2017.docx 

From the menu on up side of the webpage, clicking “Stream Select”, it displays the interface 
where users can choose the programs to Mux out. (Figure-5) 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Figure-5

 

Configure ‘Input Area’ and ‘Output Area’ with buttons in ‘Operation Area’. Instructions are as below: 

Enable/disable the CA Filter function. Clicking this box, you can filter out the input CA-PIDs 

to avoid disturbing with the device scrambling function. 

: To enable/disable the PID remapping (disabled recommended for pass through) 

  To refresh the input program information 
  To refresh the output program information 

  Select one input program first and click this button to transfer the selected program to the 

right box to be processed to the output. 

  Similarly, you can remove TV Services from the multiplex in the right box. 

  To select all the input programs 

  To select all the output programs 

  To parse programs 

time limitation of parsing input programs from TS 

Program Modification:   

The multiplexed program information can be modified by selecting the program in the ‘output’ 
area. For example, when clicking on a service, it opens apopup as dialog box (Figure 6) where you 
can change or insert new data or even rename the service. 

Output Area 

Operation Area 

Input Area 

Содержание HDC 5016




































Отзывы: