Understanding the LCD Menus
57
Start Value
– A specific timecode value will be used when the timecode generator is started.
The desired value will be entered in the Generate or Jam Sync menus.
Input
– The timecode present on the input video source will be used by the timecode generator.
If no timecode is present, the generator will start at 00:00:00:00.
Mode Menu
The Mode Select menu will display a choice of five timecode processing modes, selectable by turning the
rotary encoder on the control panel. Each mode will display a sub menu of choices or timecode registers.
Off
– Prevents any timecode from being inserted into the output video. (Default)
Input
– Converts the incoming timecode to the appropriate output rate.
Input Regen
– Synchronizes the output timecode to the input timecode. This is a useful mode
when converting between frame rates.
Generate
– Starts generating output timecode when the Start button is pressed. The starting value
for the output timecode generator may be set to match the input timecode or may be a user
defined value set via a register on the Generate mode timecode menu.
Jam Sync
– Pauses the output timecode generator until a user-defined input timecode value is
reached, at which time the generator starts counting. The starting value for the output timecode
generator may be set to match the input timecode or may be a user-defined value set via a register
on the Jam Sync mode timecode menu.
Main Menu
Back
Audio
Setup
3D
Ancillary
Data
Noise
Reduction
Video
1
Main Menu
Ancillary Data
Back
Video
Index
Timecode
Closed
Caption
2
Ancillary Data
Input
Start Value
Timecode
Back
Next
Start
Source
Setup
Start
Prev
Set
Timecode
Mode
Select
3
Timecode / Start Source
Main Menu
Back
Audio
Setup
3D
Ancillary
Data
Noise
Reduction
Video
1
Main Menu
Ancillary Data
Back
Video
Index
Timecode
Closed
Caption
2
Ancillary Data
Jam Sync
Generate
Input Regen
Input
Off
Timecode
Back
Next
Start
Source
Setup
Start
Prev
Set
Timecode
Mode
Select
3
Timecode / Mode Select
