Understanding the LCD Menus
64
3D Mode
In the 3D Mode menu, “Off” implies normal 2D processing. The following selections are available to enable
3D processing:
3D Convert
– This mode enables processing of stereoscopic left and right eye inputs, which may
be input via the SDI or HDMI inputs. This mode will also synchronize the incoming stereoscopic
signals, which means that two non-synchronous inputs may be input to the Teranex 3D Processor
and the outputs will be synchronized.
- Connect your Left and Right Eye signals to SDI Input A and B, respectively.
2D to 3D
– This mode enables the 2D to 3D conversion algorithm. Any 2D video signal may be
converted into a simulated 3D output.
- If you’re using an SDI input, connect your 2D source to SDI Input A.
- When 2D to 3D is selected, the Intensity and Depth buttons will become available. Descriptions
for these settings are provided a bit later in this manual.
3D Align
– This mode enables the 3D alignment tools, including image flip, horizontal and vertical
positioning, axial rotation and toe-in.
- Connect your Left and Right Eye signals to SDI Input A and B, respectively.
Main Menu
Back
Audio
Setup
3D
Ancillary
Data
Noise
Reduction
Video
1
Main Menu
2D to 3D
3D Align
3D Convert
Off
3D Mode
Back
Camera
Align
Depth
Intensity
Output
Input
3D Mode
2
3D / 3D Mode
