Blackmagicdesign Teranex 2D Processor, Инструкция по установке и эксплуатации

Страница: 20 / 969

To add a Teranex Processor using Teranex Setup:
1 Press the + button at the bottom left corner of the login pane to add a device.
2 Type in the IP address and press ‘add’.
3 The Teranex Processor will appear as another controllable device on your network.
To manually add a Teranex Processor, click the “+” icon on the login pane to open
the ‘Add a Teranex’ window, then enter the IP address of your Teranex Processor.
Menus and Buttons
Most of the remote control functions and parameters in the interface are very intuitive,
especially if you are familiar with the front panel operation of the Teranex Processors.
Function Page Bar
Setup and operational controls are separated by function into six pages.
Setup
Selection of video and audio input sources, output video format, external reference and
other functions. Unlike the front panel mode of operation, a change of output format is
immediately processed and does not require confirmation.
Processing
Access to Video Proc Amp and Color Correction controls, as well as noise reduction
and other advanced functions.
Aspect
Choice of aspect ratio, including fixed aspect ratios, variable aspect ratio controls and
choice of color fill for PBOX/LBOX aspect ratios.
Data
Ancillary data parameters, including timecode, closed captions and video indexing.
Audio
Audio gain, delay and mapping functions.
20 20 Changing Settings