Blackmagicdesign Teranex 2D Processor, Инструкция по установке и эксплуатации

Страница: 82 / 969

Apple Final Cut Pro 7
Setting Up
1 Launch Final Cut Pro 7 and select File>New Project.
2 Select File>Save Project As... and name your project.
3 From the Final Cut Pro menu, select ‘easy setup’...to open the ‘easy setup’ window.
4 Choose ‘HD’ for the ‘format’ and ‘25.00 fps’ for the ‘rate’. Select ‘Blackmagic HDTV
1080i 50 - 10 bit’ from the ‘use’ menu. Click ‘setup’ to close the window.
5
From the Final Cut Pro menu, select ‘system settings’ and with the ‘scratch disks’ tab
highlighted, select ‘set’ and choose the drive or drives for your scratch disks. Click ‘ok’.
Select a Blackmagic Easy Setup
Capture
1 Choose File > Log and Capture to open the ‘log and capture’ window.
2 Press ‘play’ on your video source and then press the ‘now’ button which is under the
‘capture’ heading to begin the capturing.
3 Press the ‘esc’ key at the top left of your keyboard to stop capturing.
4 Choose File > Log and Capture to close the window.
82 82 Capture and Playback