Blackmagicdesign Teranex 2D Processor, Инструкция по установке и эксплуатации

Страница: 66 / 969

Generate Menu for Teranex AV only
The Teranex AV can be used as a reference generator via its ‘reference output’ connection.
The type of reference signal, black burst or Tri-level, is dependent on the output video format of
the Teranex AV. Some video formats permit the use of specific reference types only. For
example, if NTSC is your Teranex output format, only black burst at 59.94Hz will be generated.
Similarly, for a 1080p23.98 output, only tri-level sync is possible. Other formats, such as
1080i59.94, allow the use of either type. The different Tri Level reference levels are Tri-level
progressive, or TRI-P, and Tri-level interlaced, or TRI-I.
When your output
video format is
Your choices for generated reference signals are:
525i59.94 NTSC Blackburst 59.94
625i50 PAL Blackburst 50
720p50 Blackburst 50 or Tri-level Progressive 50
720p59.94 Blackburst 59.94 or Tri-level Progressive 59.94
720p60 Tri-level Progressive 60
1080p23.98 Tri-level Progressive 23.98
1080PsF23.98 Tri-level Interlaced 47.96
1080p24 Tri-level Progressive 24
1080PsF24 Tri-level Interlaced 48
1080p25 Blackburst 50 or Tri-level Progressive 25
1080PsF25 Blackburst 50 or Tri-level Interlaced 50
1080p29.97 Blackburst 59.94 or Tri-level Progressive 29.97
1080PsF29.97 Blackburst 59.94 or Tri-level Interlaced 59.94
1080p30 Tri-level Progressive 30
1080PsF30 Tri-level Interlaced 60
1080i50 Blackburst 50 or Tri-level Interlaced 50
1080p50 Blackburst 50
1080i59.94 Blackburst 59.94 or Tri-level Interlaced 59.94
1080p59.94 Blackburst 59.94
1080i60 Tri-level Interlaced 60
Reference>Generate
Blackburst
TriLevel
Reference
Pixel
Offset
Line
Offset
Type
Generate Processing
Factory
Reset
Still
Frame
Reference
Ethernet System Setup
Info
System Setup>Reference
66 66 Teranex Processor Settings