Blackmagicdesign Teranex 2D Processor, Инструкция по установке и эксплуатации

Страница: 56 / 969

Timecode Generator
The ‘timecode generator’ menu lets you choose from four available timecode modes, or disable
manual timecode processing.
Off
No timecode data will be inserted into the output video. This is the default setting.
Input
Select ‘input’ mode to feed the input timecode directly to the output. This is useful if
you want to preserve your source timecode and your input and output frame rates
are the same.
It’s important to make sure that the ‘drop frame’ mode in the ‘timecode setup’ menu is
set to ‘auto’ to ensure the output timecode will match the input timecode.
To set the ‘reference’ menu to ‘input’, go to Main Menu>Setup>Reference and
select ‘input’.
Input Regen
The ‘input regen’ mode synchronizes the input timecode to the output timecode and is
often used when performing frame rate conversions, such as1080i50 to 1080i59.94.
‘Input regen’ mode should only be used when your Teranex processor is locked to your
input video.
‘Drop frame’ and ‘non drop frame’ modes are both supported in 23.98, 29.97 and 59.94
frame rates. However, in a conversion where the source timecode is drop frame and
the output format supports only non drop frame timecode, the output timecode will be
automatically converted to non drop frame.
Ancillary Data
Closed
Caption
Video
Index
Timecode
Ancillary Data Menu>Timecode
Timecode
Off
Input
Input Regen
Generate
Jam Sync
Start
Start
Source
Next Prev
Setup
Timecode
Generator
Set
Timecode
Timecode Menu
NOTE If you want to ensure the output timecode matches your input timecode,
do not use an external reference. The external reference can cause a dropped
or duplicated frame in the output, which will affect your timecode count.
Timecode
Input
Off
Input Regen
Generate
Jam Sync
Start
Start
Source
Next Prev
Setup
Timecode
Generator
Set
Timecode
Timecode Generator Menu>Input
56 56 Teranex Processor Settings