Blackmagicdesign Teranex 2D Processor, Инструкция по установке и эксплуатации

Страница: 17 / 969

Presets
Use the six ‘preset’ buttons to save and recall your conversion settings. Presets may also be
saved, recalled and given descriptive names via the Blackmagic Teranex Setup utility.
Presets wil save all operating parameters of your Teranex for later recall. For example, you
could store customized proc amp or aspect ratio settings for instant recall at the moment they
are needed in your production. Or, you could save special timecode, closed caption or audio
channel mapping configurations for easy repetitive use day after day.
‚
To SAVE a preset:
Hold the desired ‘preset’ button for three seconds. The button flashes to indicate
the preset was saved and remains illuminated until a setting is adjusted.
‚
To RECALL a preset:
Press the desired ‘preset’ button and select ‘recall’ using the soft menu button.
Once recalled, the ‘preset’ button will illuminate until settings are changed.
The Preset buttons are used to easily save and recall conversion settings.
Audio and System Status LEDs
While performing your conversions, keep an eye on the status LEDs. Illuminated LEDs display
signals and communications that are present. For example, indicators tell you which channels
contain audio, what power connections are being used, if an external reference signal is present
and more. The maximum number of channels supported for each audio type is as follows:
Audio Type Teranex 2D Teranex 3D Teranex AV Teranex Express
Embedded 16 16 16 16
AES/EBU 8 4 4 0
Analog 4 2 2 0
Recall preset 1?
Cancel Recall
STEREO IN AES/EBU DIGITAL AUDIO IN/OUT HDMI IN
IN
REF IN Y/NTSC/PAL IN Y/NTSC/PAL OUT B-Y IN B-Y OUT R-Y IN R-Y OUT
LOOP OUT OUT
SD/HD/3G-SDI
HDMI OUT
ANALOG AUDIO IN/OUT
GND +12V GND
AUX POWER
L
R
REMOTE IN/OUT
SD/HD/3G-SDI
IN
OUT
SDI
VIDEO
HDMI
ANLG
AUDIO
EMBED
AES
ANLG
FORMAT
486
720
2K
1080
576
1080
FRAME
P
I
PSF
MENU
HOME
MENU
1
MENU
2
REM
LOCK
PANEL
LOCK
RATE
23.98
25
29.97
30
24
50
59.94
60
VIDEO
GAIN
SAT
R-Y
B-Y
BLK
HUE
SHARP
PRESETS AUDIO STATUS
SYSTEM STATUS
1
3
5
2
4
6
ANAM
LBOX
PBOX
ASPECT
SMART
14:9
CCUT
ZOOM
ADJ
STEREO IN AES/EBU DIGITAL AUDIO IN/OUT HDMI IN
IN
REF IN Y/NTSC/PAL IN Y/NTSC/PAL OUT B-Y IN B-Y OUT R-Y IN R-Y OUT
LOOP OUT OUT
SD/HD/3G-SDI
HDMI OUT
ANALOG AUDIO IN/OUT
GND +12V GND
AUX POWER
L
R
REMOTE IN/OUT
SD/HD/3G-SDI
IN
OUT
SDI
VIDEO
HDMI
ANLG
AUDIO
EMBED
AES
ANLG
FORMAT
486
720
2K
1080
576
1080
FRAME
P
I
PSF
MENU
HOME
MENU
1
MENU
2
REM
LOCK
PANEL
LOCK
RATE
23.98
25
29.97
30
24
50
59.94
60
VIDEO
GAIN
SAT
R-Y
B-Y
BLK
HUE
SHARP
PRESETS AUDIO STATUS
SYSTEM STATUS
1
3
5
2
4
6
ANAM
LBOX
PBOX
ASPECT
SMART
14:9
CCUT
ZOOM
ADJ
TIP Depending on the preset settings, recalling a preset may momentarily disrupt the
output video and audio. An example would be a format conversion preset. A preset
that only changes ‘proc amp’ or ‘aspect ratio’ settings will not typically cause a loss of
output. Be sure to test your presets prior to using them.
17 17 Changing Settings