STL27 – STL28
4
During lifting the operator should ensure that the load does not present any risk; after raising the vehicle a small amount he
should stop and check that it is correctly positioned before continuing.
THE OPERATOR should check the load and the loading platform during raising and lowering.
It is forbidden to climb on the load or the loading platform when they are raised.
Never start the vehicle when it is raised, even a little, or before the lift is completely lowered.
Figure 2
Never use the lift unless all the safety systems are working properly. Failure to follow these rules may result in serious injury
or irreparable damage to the vehicle lift and / or to the vehicle placed on it.
GENERAL PRECAUTIONS:
-
The operator must follow the regulations in force in the country in which the lift is installed.
In addition, the operator must:
-
Always work in the operating area in accordance with the instructions in the manual.
-
Never remove the protective covers or dismantle or close the mechanical, electrical or other safety systems.
-
Read the safety regulations applying to the lift and the safety instructions in the manual.
The following terms are used in the manual to describe the types of risk:
DANGER
: for the possibility of a risk that could cause serious injury or death
WARNING
: describes situations and / or actions that could cause injury or but not death
CAUTION
: describes situations and / or actions that are dangerous and likely to cause slight injury and / or damage
to the lift, the vehicle or other goods
RISK OF ELECTRICAL DAMAGE
:
the lift has specific safety equipment installed in areas of high risk.
RISK AND MEANS OF PROTECTION
:
these are risks to which the operator is exposed when the vehicle is
in the raised position, and the means of protection installed to minimise any dangers.
WARNING
Do not move the vehicle when raised on the platform. Remove the platforms and the rubber accessories only when
the lift is in the lowest position and not loaded.
