STL27 – STL28
7
II) INTRODUCTION
CAUTION
This installation manual is destined for qualified bodyshop personnel used to working with lifts, and the technicians
who are in charge of the installation and maintenance of he lift.
This manual is essential to the use of the lift, and as such should be kept in an easily accessible place for consultation. We
advise giving special attention to the chapter dealing with safety.
This manual is an integral part of the vehicle lift and should always accompany it, even in the event of resale.
Only qualified and authorised personnel may operate the lift. This applies especially to transport, assembly, installation,
maintenance, overhauling, moving, dismantling, etc. The manufacturer cannot be held responsible for damage caused to
persons, vehicles or objects in the event of inappropriate use of the lift.
Lifts are designed and built according to the following standards:
- European Directives: 2004/108/EC – 2006/42/EC – 2006/95/EC
- European standards: EN1493 / EN ISO 12100/1 / EN ISO 12100/2 -Electrical standards: EN 60204/1
III) PACKAGING, TRANSPORT AND STORAGE
CAUTION
Operations to do with working, unpacking and transport of the equipment should be carried out exclusively by
qualified personnel having a good knowledge of the use of the lift and its manual
HANDLING THE EQUIPMENT IN ITS PACKAGING
The boxes should be lifted and moved with a fork lift truck or a crane. (Figure 8).
The means used must be suitable for safe handling, considering the size, weight, centre of gravity, protruding parts
and fragile components which must not be damaged.
Figure 8
The overall weight of the package is approximately 400 kg.
The weight of the oil pump delivered separately on a pallet is approximately 40 kg
