STL27 – STL28
8
STORAGE
The lift in its packaging should always be stored in a covered and protected place at a temperature between – 10°C + 40°C
and protected from direct sunlight.
TRANSPORT- STACKING BOXES
The type of packaging used allows up to 5 lifts to be stacked on top of one another, provided they are correctly positioned
and are in no risk of falling. The boxes must only be stacked with wooden battens between them, never directly one against
the other. The boxes should be properly lashed during truck or container transport. Oil pumps are dispatched vertical on a
pallet; they must not be stacked or laid on their side, as damage could result.
OPENING THE BOXES
On receipt check that the equipment has not suffered any damage during transport and that all the items mentioned on the
packing list are present. Any damage or missing part must be reported to the carrier immediately, and then to the
manufacturer with the appropriate proof.
Proceed with the utmost care to avoid damaging the oil pump or the control console.
CAUTION
It is highly recommended to read the safety instructions before using the lift
DISPOSAL OF PACKAGING
The wood from the pallet can be reused or recycled; the shrink film should be disposed of in accordance with the standards
and regulations covering the recycling of plastics in force in the country where the lift is installed.
