STL27 – STL28
9
IV) GENERAL DESCRIPTION
The electro-hydraulic lift is installed on the floor or recessed into a pit. It is designed and built for lifting automobiles and
holding them in the raised position. The main parts of the lift are:
-
Platform
Figure 9: detail of the parts comprising the lift
.
Base
-
Scissors
This is the moving part of the lift which enables the lifting process to take place. It consists of a series of internal and external
arms connected by a coupling joint.
-
Control unit
The unit consists of a box containing all the lift control components - electrical, hydraulic (and pneumatic depending on the
version).
1.
Main switch.
2.
Indicator light: power supply light.
3.
“Up” button. (Only on versions STL 27-STL 28-STL 2710-STL 2810).
4.
“Down” button. (Only on versions STL 27-STL 28-STL 2710-STL 2810).
5.
Arm open / close selector. (Only on versions STL 28-STL 2810).
B1 Emergency stop button (only on versions STL 2720-STL 2820).
B2 “Up” button (only on versions STL 2720-STL 2820).
B3 “Down” button (only on versions STL 2720-STL 2820).
B4 Arm opening button (only on version STL 2820).
B5 Arm closing button (only on version STL2820)
Figure 10
Figure 10a
B1
B2
B4
B3
B5
1
2
3
5
4
