STL27 – STL28
22
IN ADDITION, WE RECOMMEND TO
•
Never make modifications or replace a component by a similar one.
•
Make the first checks 30 days after the installation of the equipment, and carry out a full technical inspection every 200
hours of operation or at the most every 6 months.
WARNING
Used oil must be disposed of according to the regulations in force.
DEMOLITION OF THE LIFT
ALL THE SAFETY INSTRUCTIONS INDICATED FOR ASSEMBLY SHOULD ALSO BE FOLLOWED WHEN
DISMANTLING AND DEMOLISHING THE LIFT.
In the same way as for the assembly, the dismantling and demolition of the lift should be done by approved technicians.
The metal parts should be considered as ferrous metals and treated as such. In any event, all materials from the demolition
should be disposed of according to the standards in force in the country or place of demolition. In addition, we remind users
that, for fiscal reasons the demolition of the lift is subject to formalities in accordance with the legislation in force in the country
where the lift was installed before its demolition.
IX) SPARE PARTS
WARNING
-Only use genuine spare parts.
-Using other parts may seriously affect the safety of the lift; it also automatically cancels the warranty and releases
the manufacturer from any responsibility in the event of injury or damage to the appliance due to the use of these
parts.
For any spare parts order:
•
quote the serial number and manufacturing year of the lift.
•
specify the required part number.
WARNING
Please follow ALL THE SAFETY RECOMMENDATIONS indicated during replacement of parts and repairs
All precautions must be taken TO PREVENT THE LIFT BEING STARTED ACCIDENTALLY:
•
the control panel main switch must be padlocked in the '0' position.
•
the key to the padlock should be kept by the maintenance agent throughout the operation.
IN THE EVENT OF AN ANOMALY, IMMOBILISE THE LIFT AND CONTACT OUR SERVICE DEPARTMENT
IMMEDIATELY.
