Black Box WRT-300BGN-R2 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 96

background image

724-746-5500 | blackbox.com

Page 59

Chapter 3: System and Network Setup

After you finish with the settings, please click on the “Apply” (10) button and the following message will be displayed:

Figure 3-78. Settings saved successfully screen.

Click on the “Continue” button to go back to the previous setup menu to continue with other setup procedures. Click on the
“Apply” button to reboot the router so the settings will take effect (wait for about 30 seconds while the router reboots).

To reset all settings in this page back to the previously saved values, click on the “Cancel” button.

3.7.5 Wi-Fi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) is the simplest way to build a connection between wireless network clients and this wireless router.
You don’t have to select an encryption mode and input a long encryption passphrase every time you need to setup a wireless
client, just press a button on a wireless client and this wireless router, and the WPS will do the rest for you.

This wireless router supports two types of WPS: Push-Button Configuration (PBC) and PIN code. If you want to use PBC, you have
to push a specific button on the wireless client to start WPS mode, and switch this wireless router to WPS mode, too. To do this,
press the wireless router’s “Reset/WPS” button, or click on the “Start PBC” button in the Web configuration interface. If you
want to use PIN code, you have to know the wireless client’s PIN code and switch it to WPS mode, then provide the PIN code of
the wireless client you want to connect to this wireless router. Detailed instructions are listed on the next page:

«
...
57
58
59
60
61
...
»

Содержание WRT-300BGN-R2

































































































Отзывы:

Нет отзывов

Похожие инструкции для WRT-300BGN-R2

AirPlus XtremeG Ethernet-to-Wireless Bridge...

Бренд: D-Link Страницы: 31

Бренд: Vonets Страницы: 8

Бренд: Paradyne Страницы: 85

Бренд: Lancom Страницы: 25

ER3-100 (5K02-55)

Бренд: 8e6 Technologies Страницы: 74

Бренд: Abocom Страницы: 1

Бренд: 3Com Страницы: 32

SmartSwitch 8-slot

Бренд: Cabletron Systems Страницы: 150

DiamondLink 3201

Бренд: Patton Страницы: 12

Ezi-SERVOII EtherCAT TO

Бренд: Fastech Страницы: 108

Бренд: Global411 Страницы: 15

Acme Packet 3900

Бренд: Oracle Страницы: 70

Бренд: e+p Страницы: 2

Бренд: M86 Security Страницы: 540

Бренд: mikroElektronika Страницы: 6

Бренд: SMC Sierra Monitor Страницы: 43

Бренд: Ezviz Страницы: 38

Бренд: Porter-Cable Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды