Black Box ET0010A, Руководство пользователя CLI

Страница: 34 / 212

ETEP CLI User Guide 35
3
Configuring the ETEP
This section includes the following topics:
●
Configuration Overview
●
Basic Configuration
●
Layer 2 Configuration
●
Layer 3 Configuration
●
Shutting Down the ETEP
Configuration Overview
The information in this chapter describes how to configure the ETEP using CLI commands. The
procedures described in this chapter assume that you are logged in as the Administrator user, although
some of the basic configuration commands are also available to the Ops user.
This section is organized into three sections:
●
“Basic Configuration” on page 36
Describes commands that are common to Layer 2 and Layer 3 operation, such as management port
configuration, date and time, auto-negotiation, session inactivity timer, and loss of signal pass through.
●
“Layer 2 Configuration” on page 45
Describes commands that apply only when the ETEP is deployed in a Layer 2 environment.
●
“Layer 3 Configuration” on page 47
Describes commands that apply when the ETEP is deployed in a Layer 3 environment. Some setting
may be needed for network interoperability, and others are used only when the ETEP is deploying
virtual IP or remote IP distributed key policies.
At the beginning of each section you will find a list of command and their default values to help you
determine which commands need to be modified to work in your network environment.